Stuck Nutz Red Threadlocker
A high strength anaerobic threadlocker designed to permanently lock fasteners. Exhibits good temperature and solvent resistance. Performs on aluminum, steel, plated, stainless steel, and special alloy parts.
Recommended Threaded Fastener Sizes: Locks and seals fasteners from up to 1'' in diameter.
Bottle Size: 0.34 oz (10 mL)
Competes With: Competes with Loctite® 271™ (271 is a trademark and Loctite is a registered trademark of Henkel IP & Holding GMBH LLC, Germany)
Fixture Time (minutes): 30
Full Cure Time: 24 Hours
Temp Range: -65°F-300°F
Max Gap Fill: 0.007"
Break Away Torque (in-lbs): 250
Prevailing Off Torque (In-lbs): 250
Warnings: Not recommended for use in pure oxygen, or oxygen rich environments., Not recommended for use with plastics, especially thermoplastics.
Stuck Nutz Blue Threadlocker
Medium Strength, Oil Tolerant, Anaerobic Threadlocker designed for locking threaded fasteners, that require disassembly with standard hand tools. Exhibits good temperature and solvent resistance.
Recommended Threaded Fastener Sizes: 1/4" to 3/4"
Bottle Size: 0.34 oz (10 mL)
Competes With: Competes with Loctite® 243™ (243 is a trademark and Loctite is a registered trademark of Henkel IP & Holding GMBH LLC, Germany)
Fixture Time (minutes): 30
Full Cure Time: 24 Hours
Temp Range: -65°F-300°F
Max Gap Fill: 0.015"
Break Away Torque (in-lbs): 195
Prevailing Off Torque (In-lbs): 70
Warnings: Not recommended for use in pure oxygen, or oxygen rich environments., Not recommended for use with plastics, especially thermoplastics.
top of page
$11.99Price
bottom of page